Showing results for "closet door finger pulls"

This Closet Door Finger Pull is constructed from steel and comes finished in satin nickel. It has a nail that easily sets inside of a cup and remains unseen. This type of pull fits into most mortise-style installations.

• Product Type: Push/Pull Plate
• Overall: 0.3125'' H x 2'' W x 2'' D

It’s a door pull! Does exactly that ;). Jennifer. Montreal, QC. 2020-09-28 12:18:55

• Product Type: Pocket Door Hardware
• Overall: 2.44'' H x 2.44'' W x 0.39'' D

I love it easy to install. Susan. Montreal, QC. 2021-11-03 07:39:12

Replace or repair a broken closet door with this Prime-Line N 7342  Closet Pulls. This closet door pull comes complete with fasteners for a quick and easy installation. Constructed from solid brass with a satin nickel finish, these sliding door pulls are strong, durable, and built to last. This closet door handle pull measures 3-1/4 inches in height and 1-3/8 inches in width with a 3/8 inch depth. For further closet sliding door handle dimensional information, please see the line drawing.

• Product Type: Push/Pull Plate
• Overall: 3.25'' H x 1.375'' W x 0.375'' D

. Donna. Thunder Bay, ON. 2022-03-16 10:37:13

This mortise cup closet door pull is constructed of stamped steel and comes finished in antique brass. The outside diameter of this pull is 3/4 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 4 pulls per package. Installation tip: to avoid damaging the pulls during installation; use a soft mallet while hammering. Silicone glue may be required if the hole has worn larger.

• Product Type: Push/Pull Plate
• Overall: 5.4'' H x 3.8'' W x 0.6'' D

This mortise cup closet door pull is constructed of stamped steel and comes finished in satin nickel. The outside diameter of this pull is 2-1/8 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 2 pulls and 4 nails per package. Installation tip: to avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place. Silicone glue may be required if the hole has worn larger.

• Product Type: Push/Pull Plate
• Overall: 0.3125'' H x 2.125'' W x 2.125'' D

This is a stamped steel 2 in. round door pulls with a matte black finish. It is pressed into the 2-1/8 in. diameter hole in the closet door and held in by a set of nails. Silicone glue may be required if the hole has worn larger. Used on a variety of closet door manufacturers' doors. There are 2 pulls and 4 nails per package. Each package contains 5 closet door finger pulls.

• Used on a variety of closet door manufacturers doors.
• Flush mounted 2 in. diameter door pull.
• Stamped steel construction with a matte black finish.
• Low-profile design.
• A hammer may be required for installation.

This mortise cup closet door pull is constructed of solid brass and comes finished in classic bronze. The outside diameter of this pull is 3/4 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 4 pulls per package. Installation tip: to avoid damaging the pulls during installation; use a soft mallet while hammering. Silicone glue may be required if the hole has worn larger.

• Product Type: Push/Pull Plate
• Overall: 0.3125'' H x 0.75'' W x 0.75'' D

This is a solid brass 3/4 inch round door pull with a beautiful finish. It is pressed into the 3/4 inch diameter hole in the closet door. Silicone glue may be required if the hole has worn larger. It can be used on a variety of closet doors.

• Product Type: Shutter/Door Accessory

Worked perfectly for my use.. Anonymous. . 2024-11-11 20:50:40

We have many years of experience in hardware manufacturing and our team will test the materials thousands of times before manufacturing, so that our products can be used for several years. We are committed to let everyone who loves life use the products we have made with our heart and we believe that choosing us must be a good choice.

• Durable - finger pulls are made of carbon steel, which have good wear resistance and durability
• Easy installation - simple and quick snap-in installation, you don't need any nails
• No sharp edges - the surface and all edges of finger pull have been polished by hand for several hours, which has a soft, smooth and high-quality feel
• More silent - we try to eliminate metal-to-metal contact, so that the gate can be closed smoothly and quietly

Replace or repair a broken closet door with this Prime-Line N 7138  Closet Pulls. This closet door pull comes complete with fasteners for a quick and easy installation. Constructed from solid brass with a solid brass finish, these sliding door pulls are strong, durable, and built to last. This closet door handle pull measures 3-1/4 inches in height and 1-3/8 inches in width with a 3/8 inch depth. For further closet sliding door handle dimensional information, please see the line drawing.

• Product Type: Shutter/Door Accessory
• Overall: 3.25'' H x 1.38'' W x 0.38'' D

Perfect size to replace the old pulls on the sliding doors of my cupboard.. Judith. Surrey, BC. 2020-02-04 11:53:35

This mortise cup closet door pull is constructed of stamped steel and comes finished in satin nickel. The outside diameter of this pull is 1-3/4 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 2 pulls and 4 nails per package. Installation tip: to avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place. Silicone glue may be required if the hole has worn larger.

• Product Type: Push/Pull Plate
• Overall: 0.3125'' H x 1.75'' W x 1.75'' D

They are a great improvement to the former ones. . Georgina. Pitt Meadows, BC. 2020-08-14 16:29:08

LIVING ON THE EDGE - Easily achieve a modern, minimalist aesthetic with the restrained profile and comfortable grip of Emtek’s new Cabinet Edge Pulls. A unique soft square design, our new Cabinet Edge Pulls come in 7 different sizes: 1”, 3”, 4”, 6”, 8”, 10”, and 12”. Available in our modern finishes, this tab-style pull is perfect for a kitchen remodel or bathroom vanity.

• Includes mounting/installation screws.

super sleek design. carolina. toronto, ON. 2024-02-08 12:13:50