Showing results for "crane lifting helicopter"

This model is the Sikorsky S-64 Skycrane. This is an American twin-engine heavy-lift helicopter. Transport helicopters are used to lift heavy loads when other methods are not feasible. For example, getting to the tops of buildings or mountains and hills. This helicopter is powered by two 4,050 shaft horsepower engines. Although this was originally a Sikorsky Aircraft product, Erickson Air-Crane purchased the type certificate and manufacturing rights. Since then, Erickson Air-Crane has become the world's largest operator of S-64 Aircrane and has made over 1,350 changes to the airframe, instrumentation, and payload capabilities of the helicopter. The Erickson Air-Crane fleet is leased worldwide to organizations, companies, and Federal Government agencies for either short-term or long-term use in fire suppression, civil protection, heavy lift construction, and timber harvesting. This transport helicopter model is almost 40 inches long and 15 inches wide, making this a 1:21 scale. The only assembly needed for this helicopter is putting the three pieces of the propeller together. There are three pieces to the entire propeller and they are stacked on each other and held in with screws and hex nuts. Once the propeller is assembled, slide the entire piece over the top and finally hold it all together with the top piece. Once that is together, the helicopter can be held up as long as the nuts are secured and ready to be suspended. Attach the included cargo and suspend this craft by its built-in chain. Under the cargo, there is an LED light bar to give an even greater aesthetic appeal. The paint job and colour scheme on the helicopter gives a strong feel of authenticity. Hang up this model, plug in the cargo and enjoy.

• Overall: 12'' H x 30'' W x 40'' D
• Overall Product Weight: 8.1lb.

A Multi-Station Transportable Jib Crane is designed for use in multiple locations, includes jib crane and one base socket. Extra base sockets may be purchased for use in other locations. Friction brake design allows positive locking and controlled rotation of heavy loads. Standard six (6) inch high I-beam with three (4) inch flange width. Rugged welded steel construction. Requires reinforced concrete pad for installation. Hoist and trolley sold separately.

• Overall Width - Side to Side: 17''

A power lift jib crane is designed for material handling applications on docks, in warehouses, or in truck beds. This intermittent unit uses crane feature rotation hand brakes that offer unlimited positioning. The mast mounts permanently. Boom adjusts in one (1) foot increments and can be positioned at four (4) elevations. Unit is designed for vertical lifting only. Do not use the unit for lifting personnel or overhead lifting.

• Boom telescopes in and out for greater reach and versatility

The fully powered electric floor crane has an easy and quick operation. The unit raises and lowers loads with a push of a button. It can manoeuvre loads in warehouses and trailers. The heavy-duty rigid hook with a safety latch provides long service. The high-torque DC drive and lift motors handle heavy-duty jobs. The floor crane includes the integral battery charger, battery level gauge, and emergency battery disconnect. The truck rolls smoothly on poly-on-steel, steer, and load wheels. Ergonomic handle features easy to operate throttle with infinite adjustment of forward and reverse speeds, controlled lift/lower controls, adjustable length legs, proprietary safety-enhancing emergency reverse function, and horn. When the proprietary safety-enhancing emergency reverse function is actuated, the emergency reverse belly switch instantly reverses direction and moves the unit forward (away from the operator) until the switch is released or after 1.5 seconds have elapsed. The built-in safety circuit will automatically disable the entire unit if the emergency reverse belly switch is activated for more than 1.5 seconds after which the unit must be re-set to return to normal operating conditions. This state-of-the-art safety device provides a level of operator protection that is unmatched by any unit on the market today. Also includes an electromagnetic disc brake with an automatic dead-man feature that activates when the user releases the handle. Not recommended for use on incline surface and no greater than 4 degrees on a declined surface.

• Easy-to-operate throttle for forward and reverse direction with infinite speeds
• A fully-powered floor crane makes the movement of material quick and easy
• Safety belly reverse button improves worker safety

Pickup Truck Crane:Picture this—a heavy-duty steel structure with unmatched rust and corrosion resistance. Not only does it rotate 360 degrees to fit your lifting style, but it also comes with a locking pin for secure placement. Customizable in length, height, and angle, this truck crane is the answer to all your cargo-handling prayers.

Pickup Truck Crane: Picture this—a heavy-duty steel structure with unmatched rust and corrosion resistance. Not only does it rotate 360 degrees to fit your lifting style, but it also comes with a locking pin for secure placement. Customizable in length, height, and angle, this truck crane is the answer to all your cargo-handling prayers.

The air/hand pump hydraulic shop crane allows one person to not only manoeuvre the product from one location to another but lift the product effortlessly with the assistance of everyday factory air. If your airline does not reach you can lift your product with the hand pump hydraulic option. This shop crane rolls smoothly on steel casters. The innovative hoist offers heavy-duty lifting power while optimizing space when in the collapsed position. Standard features: foldable legs, adjustable boom, swivel hook, and steel construction.

• Overall: 58'' H x 43'' W x 72'' D
• Overall Product Weight: 205lb.

• Subject: Animal
• Material: Resin/Plastic
• Hollow: Yes
• Overall: 24.41'' H x 13.19'' W x 18.5'' D
• : Resin

Beautiful Eagle, so life like, extra fine detail! super fast shipping, Thank you. Spencer. Killarney, MB. 2025-06-19 21:05:06

• 【HEAVY DUTY ENGINE CRANE】Heavy steel construction for maximum durability,8 Tons Cylinder Hydraulic Pump.

A power lift jib crane is designed for material handling applications on docks, in warehouses, or in truck beds. This lift jib crane is the economical answer to your material handling problems. It offers light-duty, intermittent use. Locking manual rotation. Unit is designed for vertical lifting only. Do not use the unit for lifting personnel or overhead lifting.

• Overall: 65.68'' H x 13.5'' W x 51.06'' D
• Overall Product Weight: 200lb.

• 100% Anti-shrink pine wood bars and Epson anti-fade ultra chrome inks