Showing results for "extended strike plate"

These standard latch strikes are constructed of steel and come in a satin nickel or oil-rubbed bronze finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 in. fasteners included with each package. These latch strikes are used by many to replace most residential interior and exterior door strikes. * Adjustment tip: To eliminate the loose rattling of a closed door, remove the strike plate and bend the tab slightly with a pair of pliers, adjusting left to right as necessary.

These do the job at a good price, other plates in these extended sizes were considerably more expensive but perhaps you get what you pay for. I needed black/oil-rubbed bronze finish and the finish wears off as soon as the latch strikes. They are also thinner gauge than other strike plates and buckle easily. Still better than having the door latch strike wood trim.. Jason. Victoria, BC. 2022-10-13 14:47:07

• Product Type: Pocket Door Hardware
• Overall: 2'' W x 2.25'' D
• Outdoor Use: Yes

Does what is needed. Shipment package was weird…a very small item packaged in a box that could hold a 1000 of them, then packed into an even bigger box that was approximately 1’ x 1.5’…yes that correct, a foot by a foot and a half box! The total package could not fit into the rural postal box, therefore I had to drive 15km out of my way to pick up the parcel. I get that they don’t want to “lose” the item due to the small size, but why such overkill!!. Dat. Anonymous. 2025-01-10 12:40:49

Quickly and easily replace your existing strike plates with one from Stone Harbour Hardware. Featuring beautiful, non-flaking finishes to match any decor.

• The size of the lip strike is the distance from the centre of the mounting holes to the edge of the lip (see diagram).
• The overall width is slightly larger. (e.g. a 3-inch size strike plate has an overall width of about 3.5 inches).
• Mounting screws included.

. Anonyme. Anonyme. 2025-07-05 14:52:44

Quickly and easily replace your existing strike plates with one from Stone Harbour Hardware. Featuring beautiful, non-flaking finishes to match any decor.

• The size of the lip strike is the distance from the centre of the mounting holes to the edge of the lip (see diagram).
• The overall width is slightly larger. (e.g. a 3-inch size strike plate has an overall width of about 3.5 inches).
• Mounting screws included.

Quickly and easily replace your existing round corner extended lip strike plates with one from Stone Harbour Hardware. Featuring beautiful, non-flaking finishes to match any decor.

• The size of the lip strike is the distance from the centre of the mounting holes to the edge of the lip (see diagram).
• The overall width is slightly larger. (e.g. a 3-inch size strike plate has an overall width of about 3.5 inches).
• Mounting screws included.

Quickly and easily replace your existing strike plates with one from Stone Harbour Hardware. Featuring beautiful, non-flaking finishes to match any decor.

• The size of the lip strike is the distance from the centre of the mounting holes to the edge of the lip (see diagram).
• The overall width is slightly larger. (e.g. a 3-inch size strike plate has an overall width of about 3.5 inches).
• Mounting screws included.

Quickly and easily replace your existing strike plates with one from Stone Harbour Hardware. Featuring beautiful, non-flaking finishes to match any decor.

• The size of the lip strike is the distance from the centre of the mounting holes to the edge of the lip (see diagram).
• The overall width is slightly larger. (e.g. a 3-inch size strike plate has an overall width of about 3.5 inches).
• Mounting screws included.

Quickly and easily replace your existing strike plates with one from Stone Harbour Hardware. Featuring beautiful, non-flaking finishes to match any decor.

• The size of the lip strike is the distance from the centre of the mounting holes to the edge of the lip (see diagram).
• The overall width is slightly larger. (e.g. a 3-inch size strike plate has an overall width of about 3.5 inches).
• Mounting screws included.

Quickly and easily replace your existing strike plates with one from Stone Harbour Hardware. Featuring beautiful, non-flaking finishes to match any decor.

• The size of the lip strike is the distance from the centre of the mounting holes to the edge of the lip (see diagram).
• The overall width is slightly larger. (e.g. a 3-inch size strike plate has an overall width of about 3.5 inches).
• Mounting screws included.

Quickly and easily replace your existing strike plates with one from Stone Harbour Hardware. Featuring beautiful, non-flaking finishes to match any decor.

• The size of the lip strike is the distance from the centre of the mounting holes to the edge of the lip (see diagram).
• The overall width is slightly larger. (e.g. a 3-inch size strike plate has an overall width of about 3.5 inches).
• Mounting screws included.

Quickly and easily replace your existing strike plates with one from Stone Harbour Hardware. Featuring beautiful, non-flaking finishes to match any decor.

• The size of the lip strike is the distance from the centre of the mounting holes to the edge of the lip (see diagram).
• The overall width is slightly larger. (e.g. a 3-inch size strike plate has an overall width of about 3.5 inches).
• Mounting screws included.

Quickly and easily replace your existing strike plates with one from stone harbour hardware. Featuring beautiful, non-flaking finishes to match any décor.

• Product Type: Back Plate
• Overall: 4.5'' H x 2.5'' W x 0.2'' D
• Outdoor Use: Yes

. Joseph. ON. 2024-05-20 10:02:07