Showing results for "foam crown moulding led"

Designed by Orio Tonini, Orac Decor’s CX189 crown moulding features a compact angular design and is designed to incorporate LED lights if desired. *Note: LEDs not included in your order* The indirect lighting profile can be used as an uplighting or downlighting system, or as general lighting. LED indirect lighting produces a beautiful glow on the ceiling and creates a warm atmosphere in your home. It is made of DUROPOLYMER, a specially formulated polyurethane resin that is high density, water resistant, and impact resistant. This durable material will not warp with changes in temperature or humidity. Mouldings come with a primed surface that is ready to paint. With integrated glue grooves, installation is fast and easy. We guarantee a full warranty when you use Orac Decor’s FDP500 adhesive. This interior moulding also exists in a flexible form, CX189F.

• Product Type: Crown
• Moulding Use: Ceiling
• Material: Urethane
• Overall: 1'' H x 78.75'' W
• Projection From Wall: 1mm

Great quality and easy installation. (I was lucky that I got their original glues to do this project.) Not easy to get paint on, probably need a primer. Overall great product. Wish Wayfair carry their glue too.. Victor. Richmond, BC. 2020-12-02 03:51:42

This product was designed by award-winning designer Ulf Moritz and consists of 2 modern profiles. Intended to enhance and modernize the existing architecture of your interior, it can be used to cover up imperfections and crevices in your wall or ceiling, as a crown moulding, panel moulding, or baseboard. It is easy to install using typical woodworking tools and comes primed white and ready for paint, glaze, or finish. This moulding conceals LED indirect light and creates subtle lighting effects by playing with light and shadow. Indirect lighting will bring warmth to a room as it adds a beautiful glow to the ceiling, eliminating the harshness of a single central pendant light fitting. Compact LEDs are easy to install, cost little to run, long-lasting, and eco-friendly. This product is made of PUROTOUCH, a high-quality polyurethane resin that is created in steel moulds to replicate plaster and allow for crisp edges. Distributed in the USA exclusively by Outwater Plastics, LCC, and Architecture by Outwater, LLC.

• Product Type: Crown
• Moulding Use: Ceiling
• Material: Urethane
• Overall: 3.125'' H x 78.75'' W
• Projection From Wall: 2mm

. Anonymous. . 2025-06-24 15:30:19

Orac Decor 991 Crown Moulding contemporary cornice for a multitude of applications. With additional installation support, this profile can flawlessly hide curtain systems. This moulding can also be used with LED lights to create the perfect mood lighting. It is made of Purotouch, a high-quality polyurethane resin created in steel moulds to replicate plaster and produce crisp edges. Installation is fast and easy. Orac’s mouldings can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. In addition, mouldings come primed white and ready for paint, glaze, or finish so they can perfectly match your interior. Distributed in the USA exclusively by Outwater Plastics, LLC, and Architecture by Outwater, LLC.

• Product Type: Crown
• Moulding Use: Ceiling
• Material: Urethane
• Overall: 4.375'' H x 78'' W
• Projection From Wall: 5.5mm

Got delivered in time. Product is lightweight and easy to mount. You also could pick upside down installation to get your light reflection on the ceiling.. Terry. Oakville, ON. 2024-12-20 08:22:07

Orac’s C355 Cornice Moulding combines contemporary design with smart engineering. This flat crown moulding extends across the ceiling, providing an intriguing floating effect between itself and your walls, thanks to its recessed shadow line at the back. It is made of PUROTOUCH, a high1quality, high1density polyurethane resin that is lightweight and durable. In addition, it is primed white and ready for paint, glaze or finish so it can perfectly match your interior. Installation is fast and easy. Our moulding can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive.

• Product Type: Crown
• Moulding Use: Ceiling
• Material: Urethane
• Overall: 1.375'' H x 78.75'' W
• Projection From Wall: 4.375mm

Great . Eli. Maple, ON. 2023-08-23 13:26:39

This elegant LED profile offers a beautiful solution to subtly incorporate indirect lighting into a classic interior.

• Product Type: Crown
• Moulding Use: Ceiling
• Material: Urethane
• Overall: 2.125'' H x 78.75'' W
• Projection From Wall: 1.625mm

Product looks great and is easy to work with. Looking forward to seeing the effect on ceiling when complete with LED lighting.. Ron. Kelowna, BC. 2022-07-17 18:02:06

C220 cornice moulding features a unique, popular profile that has an asymmetrical profile with an extended top surface projection across the ceiling. Made of polyurethane, this crown moulding is exceptionally strong, lightweight, and easy to handle. Orac Decor’s ceiling mouldings are great for renovation work because they can cover up imperfections in your wall and/or ceiling, and they are lightweight and easy to handle. In addition, they come primed white and ready for paint, glaze or finish so they can perfectly match your interior. Installation is fast and easy. Orac Decor mouldings can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. C220 is also available in flexible form, C220F, which is ideally suited for curved walls and ceilings or creative use. Distributed in the USA exclusively by Outwater Plastics, LCC and Architecture by Outwater, LLC.

• Product Type: Crown
• Moulding Use: Ceiling
• Material: Urethane
• Overall: 3'' H x 78.75'' W
• Projection From Wall: 4.625mm

• Product Type: Crown
• Moulding Use: Ceiling
• Material: Urethane
• Overall: 3.25'' H x 78.75'' W
• Projection From Wall: 1.375mm

Combining contemporary styling with smart engineering, orac decor c354 is one of a series of newly introduced flat cornice mouldings (see orac decor c353, c355, and c356) and has an asymmetrical profile with an extended top surface projection across the ceiling. An innovative, recessed fine shadow line optimally encompasses and utilizes the natural light within your environment to yield an unexpected floating effect between itself and your walls. Orac decor c354 cornice moulding is suited for use with other Orac mouldings and millwork. Pre-primed and ready for painting or staining. This cornice moulding is not available in a flexible format.

• Product Type: Crown
• Moulding Use: Ceiling
• Material: Urethane
• Overall: 1.63'' H x 78.75'' W
• Projection From Wall: 8.5mm

Wow such a nice trim. Ordered 7 pcs to complete room. Received box 2 broken pcs. 1 broken and 1 crack. Wayfair sent me new one for the broken trim received. Can’t wait to install. Charles. Anonymous. 2022-05-25 20:32:51

Orac Decor’s C900 Cornice Moulding for Indirect Lighting is a large up1lighter lighting trough inspired by Ovolo architecture, a convex, quarter-round moulding that is ideal for larger rooms. It is uniquely designed to incorporate compact LED or fluorescent lights. Producing a beautiful glow on the ceiling, this creative uplighting system adds a warm atmosphere and depth to a room. Indirect lighting can also be used as general lighting. Orac’s Mouldings for Indirect Lighting can just as easily be used without lights, if desired, making them adaptable to any space. It is easy to install using typical woodworking tools and comes primed white and ready for paint, glaze, or finish. C900 is also available in Flexible form, FC900, which is ideally suited for curved walls and ceilings or creative use. Distributed in the USA exclusively by Outwater Plastics, LLC, and Architecture by Outwater, LLC.

• Product Type: Crown
• Moulding Use: Ceiling
• Material: Urethane
• Overall: 6.75'' H x 78.75'' W
• Projection From Wall: 5.75mm

Purchased to cover a thick wire along the ceiling, worked perfectly for our purposes.. Gabriela. Vancouver, BC. 2022-04-26 16:55:29

Our Orac Decor crown moulding can easily enhance the current design style of any space. Resistant to moisture and can be used in high humidity and damp areas, such as bathrooms or basements. This moulding features one-piece construction which eliminates the need for the build-up and the possibility of post-construction separation or cracks. Produced from duropolymer, high-impact polystyrene is specially formulated by Orac Decor, which offers pronounced detailing and crisp, clean lines. Easily installed with Orac Decor's proprietary adhesives allowing you to cut down on cost and labour. 3-3/8" high x 3-3/8" projection x 4-3/4" face.

• Product Type: Crown
• Moulding Use: Ceiling
• Material: Urethane
• Overall: 3.375'' H x 78'' W
• Projection From Wall: 3.375mm

Excellent quality. Arrived on time in a reinforced shipping box. I ordered a second set once I received the first set. It is made of a type of plastic which is very well made. Definitely worth the money for the project I am working.. Tyrone. Burlington, ON. 2025-01-16 12:14:28

Orac Decor’s CX127 Crown Moulding has a timeless profile to suit all decoration styles. It is made of DUROPOLYMER, a specially formulated polyurethane resin that is high density and impact resistant. Orac Decor’s Cornice Mouldings are great for renovation work because they can be used to cover up imperfections in your wall and/or ceiling. In addition, they come primed white and ready for paint, glaze or finish so they can perfectly match your interior. Installation is fast and easy. Orac Decor mouldings can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. CX127 is also available in flexible form, CX127F, which is ideally suited for curved walls and ceilings or creative use. Distributed in the USA exclusively by Outwater Plastics.

• Product Type: Crown
• Moulding Use: Ceiling
• Material: Urethane
• Overall: 3.75'' H x 78.75'' W
• Projection From Wall: 3.75mm

Orac Decor CX190 U1Profile can be used as a baseboard, crown moulding, or indirect lighting profile, depending on which way you install it. When used as a baseboard, it is ideal for renovations as it can cover your existing wall moulding so you don’t need to remove it. Save time and money without the hassle, mess, and waste! In addition, its inner cavity is cleverly designed to hide electrical cables. When used as an indirect lighting profile, insert LED lights (sold separately) to produce a nice glow and add a warm ambiance. This versatile moulding is made of Duropolymer, a polyurethane resin that is high density, water resistant, and impact resistant. This durable material will not warp with changes in temperature or humidity. Mouldings come with a primed surface that is ready to paint. With integrated glue grooves, installation is fast and easy. We guarantee a full warranty when you use our FDP500 DecoFix Pro FDP500 adhesive.

• Product Type: Crown
• Moulding Use: Ceiling
• Material: Urethane
• Overall: 0.75'' H x 78.75'' W
• Projection From Wall: 1.125mm

Worked exactly the way I needed it to. Tamuno. Halifax, NS. 2023-10-21 19:38:43