Showing results for "queen bed rails with hooks"

A heavy-duty bed frame that will fit Queen bolt-on style headboards & footboards. You must have a headboard and footboard to use this frame. This frame requires a box spring or foundation. The queen-sized frame will have five (5) legs with the included centre bar. The centre bar for this frame is used side-to-side for queen bedding. This means this frame is not recommended for use with a split (2 pieces) box spring. The legs will adjust the frame height from 5 3/4" to 9 1/4" off the floor. The steel in this frame is a high strength, high carbon, hot-rolled steel. It is rolled using 97% recycled material producing a very strong and environmentally-friendly product. This frame utilizes a bolt-together assembly, which allows it to be adjusted to accommodate a wider variety of headboards and footboards. The frame simply bolts together through slots and holes in the rails with the provided hardware and tools at the correct width for the bedding being used. The brackets for the headboard and footboard can be quickly mounted to the frame using the provided tools and hardware. This allows for maximum adjustability to ensure that the frame will fit the width and height of your bed perfectly.

• Product Type: Bed Frame
• Material: Steel
• Box Spring Required: Yes
• Clearance - Floor to Bottom: 9''
• : Yes

This hook-on rail features simple and easy assembly for convenient use. This frame is ideal to elevate your twin or full-sized bed. 2 cross ties are added for safety. Headboard and footboard brackets are ready to hook on!

• Product Type: Bed Frame
• Material: Metal
• Box Spring Required: Yes
• : Yes

• Headboard Bracket Compatible: Yes

Adjust for Height of Headboard/Footboard: The #35 Down Hook Bolt-On Conversion Bracket for Headboard and Footboard attachment allows the consumer to make an adjustment for height. Thus, different size headboards and footboards can be accommodated. There is no provision for width adjustment with this bracket. Adjustment Range: Vertical: 2". Note on the Vertical Adjustment Range: The vertical adjustment dimensions are based on the bracket bolts being approximately 2-1/2" apart. Placing the bolts closer together would result in a greater vertical adjustment range, but could possibly decrease the strength of the connection. If a vertical height adjustment, within the specified range of 2" is needed, then our #35 would be the correct choice. Hooks Are Pointed Down: The hooks on the #35 are pointed down. The #35 bracket should be used when the headboard and/or footboard can support the weight of the bed. What's Included: The #35 Hook Plate Conversion Adapter Kit for Using a Bolt-On Frame with a Hook-On Headboard comes as a pack of 4. So, if you have a headboard and footboard to mount, you will only need one set. The #35 conversion bracket comes with 4 #35 brackets, nuts, and bolts. Please inquire should you have any questions.

• Product Type: Bed Frame Brackets
• Overall: 1.25'' H x 2'' W x 6'' L
• Weight Capacity: 800lb.

Unfortunately won't work for the footboard but it's because of our metal frame not the product. Shelley. Castlegar, BC. 2022-06-19 12:26:49

The Graco Full-Size Crib Conversion Kit allows you to extend the life of your Graco or Storkcraft crib, transforming any Graco or Storkcraft 4-in-1 or 5-in-1 convertible crib into a full-size bed. In addition, this universal crib conversion kit can be used to transform most brands of cribs into full, twin, or queen-size beds. The Graco Full-Size Crib Conversion Kit is constructed of sturdy, durable metal, and contains double-ended brackets to accommodate a headboard and footboard. For extra peace of mind, it is backed by a 1-year limited manufacturer’s warranty.

• Product Type: Full Bed Rails; Twin Bed Rails
• Compatible Crib Models: All 4-in-1 Graco Convertible Cribs
• Material: Steel

It was just what I needed. Anonymous. . 2024-01-29 16:56:11

The Hook-On Brackets are double riveted for strength and durability. Sturdy Construction: 1-1/2" x 1-1/2" (vertical) x 12 gauge side rails Made with pride in the U.S.A. These are for Standard Twin and Full size beds, not XL or Extra Long. These rails have also been used for Queen or King size "Sleigh" type beds. Please review all measurements and connections before ordering to ensure these rails will fit your bed. The industry-standard hook plates incorporated into both ends of the rails will most likely fit any headboard/footboard manufactured within the last 40 years. Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart from the centre to determine that our rail hook plates will fit appropriately. The price is for a pair of side rails (one for each side of the bed). Rails are sold in pairs only to ensure a correct fit. These are the same original factory rails that are supplied by many bed manufacturers. Please note, however, that the rails shown may not match your rails exactly. Images are for representative photos and do note that the specific rails you receive may differ slightly from the image shown here. bedCLAW Steel Rails Fit Either Twin or Full-Size Beds. Twin/Full angle steel bed side rails are designed to fit either Twin or Full-Size Beds. To use these rails, the pins inside the slot of your headboard and footboard should be 2 inches apart.

Extend the life of your Winston 4-in-1 crib and provide years of additional use by converting your crib into a beautiful full-size bed. The conversion rails are finished with the same multi-step staining process and matching the hardware to ensure that the Winston crib seamlessly transitions into any room in your home.

• Product Type: Full Bed Rails
• Compatible Crib Models: Winston Crib (Model: B15301)
• Material: Solid + Manufactured Wood

. Karen. Nepean, ON. 2025-03-26 11:26:27

Please note that the images shown on this page are for representation, and the product you receive may differ slightly due to manufacturing changes. Please review the item description and detailed measurements that are provided to ensure these bed rails will work for your application.

• These rails have also been used for "Sleigh" type beds. Please measure the length of your current rails.
• Wood rails are approx. 6 inches tall. An inside lip runs down the inside of each rail, allowing easy and secure attachment of centre support systems.

Set a modern and minimalist foundation in your restful retreat with this clean-lined platform bed frame. Crafted from metal, this platform bed features a system of slats to prop up your preferred mattress without the help of a box spring for a low-profile look. Understated black finish outfits this design, ensuring it can complement any colour palette you dream up.

• Product Type: Bed Frame
• Material: Steel
• Headboard Bracket Compatible: Yes
• Clearance - Floor to Bottom: 12''

LOVE this bed frame. I was able to keep my original wood bed frame, get rid of the box spring and simply insert this frame inside the wood frame. Easy to assemble, well made and does not move around. Supports the memory foam mattress very well. Highly recommend!. Phil H.. Yellowhead County, AB. 2020-08-13 00:46:26

This Bolt Bed Frame features simple and easy assembly for convenient use. This frame is ideal to elevate your bed. The 2 cross ties were added for safety with headboard and footboard brackets that are ready to bolt on.

• Product Type: Bed Frame
• Material: Metal
• Box Spring Required: Yes
• : Yes

Child Craft bed rails for the Camden 4-in-1 lifetime convertible crib – matching cool grey full bed rails allow for conversion of crib or toddler bed to complete full size bed. Rails are constructed from wood and wood veneers. Rails are finished to match the Camden convertible crib. Complete with full size bed slats. Child safe, non-toxic finish. Hardware included. Bed rails simply bolt on to crib long front and back sections. Full size mattress and box spring required, not included.

• Product Type: Full Bed Rails
• Compatible Crib Models: Kelsey Crib (Model: F34201), Camden Crib (Model: F31001), Abbot Crib (Model: F31902), Tanner Crib (Model: F32501)
• Material: Solid Wood

Hollywood Bed Frame's Bed Rails & Centre Supports are made in the U.S.A. from recycled railroad steel to provide top notch support and stability. Each accessory component allows you to complete the sale and offer your customers products which work with their furniture choices. Each accessory item can be shipped combined with your other Hollywood product purchases. Normal lead times and freight policies apply.

• Overall: 7.25'' H x 76'' W x 82'' L
• Box Spring Required: Yes
• Headboard Bracket Compatible: Yes
• Number of Bed Frame Legs Included: 2
• Overall Product Weight: 30lb.